Index Catalog // Hyrax

Richard D. Armstrong

Palabra clave:: Portraits and 1960s
Creador:: unknown
Editor:: Worcester Polytechnic Institute
Fecha de Creacion:: 1960-1969
Resource Type:: Image

Residual Stress Reduction During Quenching of Wrought 7075 Aluminum Alloy

Palabra clave:: Aluminum 7075, Quench Factor Analysis, Quenching, Deformation, and Residual stress
Creador:: Mitchell, Ian D
Advisor:: Sisson, Richard D.
Editor:: Worcester Polytechnic Institute
Fecha de Creacion:: 2004-05-12
Resource Type:: Thesis
Degree:: MS
Unit (Department):: Materials Science & Engineering

An Analysis of The Effect of 3-D Groove Insert Design on Chip Breaking Chart

Palabra clave:: insert, critical feed rate, chip breaking chart, insert groove, Chip, and Chip breaking
Creador:: Avanessian, Alfred
Advisor:: Rong, Yiming
Editor:: Worcester Polytechnic Institute
Fecha de Creacion:: 2005-01-25
Resource Type:: Thesis
Degree:: MS
Unit (Department):: Manufacturing Engineering

Synthesis, Integration, and Characterization of Functional Inorganic Nanomaterials

Palabra clave:: electrodeposition, AAO template-assisted nanofabrication, chemical vapor deposition, nanostructured electrode, 1 D nanomateirals, and inorganic nanomaterials
Creador:: Duan, Huanan
Advisor:: Liang, Jianyu
Editor:: Worcester Polytechnic Institute
Fecha de Creacion:: 2009-05-28
Resource Type:: Dissertation
Degree:: PhD
Unit (Department):: Materials Science & Engineering

Application of Computational Thermodynamic and Solidification Kinetics to Cold Sprayable Powder Alloy Design

Palabra clave:: Mechanical Properties, powder, atomization, equilibrium calculations, newtonian heat flow, TTT diagram, Thermodynamics, Cold spray, CCT diagram, Kinetics, Solidification, elemental impact factor, through process modeling, powder production, and Modeling
Creador:: Belsito, Danielle L
Advisor:: Sisson, Richard D.
Editor:: Worcester Polytechnic Institute
Fecha de Creacion:: 2014-01-14
Resource Type:: Dissertation
Degree:: PhD
Unit (Department):: Materials Science & Engineering

Modeling of Heat Treating Processes for Transmission Gears

Palabra clave:: heat treating, Modeling, Finite Element, quench press, Simulation, pyrowear 53, ring gear, Carburizing, and distortion
Creador:: Janzen, Isaiah
Advisor:: Sisson, Richard D.
Editor:: Worcester Polytechnic Institute
Fecha de Creacion:: 2009-12-18
Resource Type:: Thesis
Degree:: MS
Unit (Department):: Materials Science & Engineering

Nitriding - fundamentals, modeling and process optimization

Palabra clave:: compound layer growth model, Simulation, customized Lehrer diagram, gas nitriding, and steels
Creador:: Yang, Mei
Advisor:: Sisson, Richard D.
Editor:: Worcester Polytechnic Institute
Fecha de Creacion:: 2012-04-19
Resource Type:: Dissertation
Degree:: PhD
Unit (Department):: Materials Science & Engineering

Diffusion and Phase Change During Heat Treatment of Ni-B Coatings on Steel

Palabra clave:: ni-b, Heat treatment, Oxidation, diffusion, and coatings
Creador:: Shepardson, Kevin W
Advisor:: Sisson, Richard D.
Editor:: Worcester Polytechnic Institute
Fecha de Creacion:: 2008-04-28
Resource Type:: Thesis
Degree:: MS
Unit (Department):: Materials Science & Engineering

The Effects of Contamination and Cleaning on AISI 9310 Vacuum Carburized Steel

Palabra clave:: contamination, cutting fluids, cleaning, AISI 9310, vacuum carburization, rust preventative oil, and Oxidation
Creador:: Lowell, Jodi Michelle
Advisor:: Sisson, Richard D.
Editor:: Worcester Polytechnic Institute
Fecha de Creacion:: 2010-01-06
Resource Type:: Thesis
Degree:: MS
Unit (Department):: Materials Science & Engineering

Investigation of the quench and heating rate sensitivities of selected 7000 series aluminum alloys

Palabra clave:: heating rate, quench sensitivity, and Aluminum
Creador:: Nowill, Courtney Ann
Advisor:: Sisson, Richard D.
Editor:: Worcester Polytechnic Institute
Fecha de Creacion:: 2007-08-13
Resource Type:: Thesis
Degree:: MS
Unit (Department):: Materials Science & Engineering

Explore, Discover, Share

Richard D. Armstrong

Residual Stress Reduction During Quenching of Wrought 7075 Aluminum Alloy

An Analysis of The Effect of 3-D Groove Insert Design on Chip Breaking Chart

Synthesis, Integration, and Characterization of Functional Inorganic Nanomaterials

Application of Computational Thermodynamic and Solidification Kinetics to Cold Sprayable Powder Alloy Design

Modeling of Heat Treating Processes for Transmission Gears

Nitriding - fundamentals, modeling and process optimization

Diffusion and Phase Change During Heat Treatment of Ni-B Coatings on Steel

The Effects of Contamination and Cleaning on AISI 9310 Vacuum Carburized Steel

Investigation of the quench and heating rate sensitivities of selected 7000 series aluminum alloys

Limite su búsqueda

Collections

Year

Creador

Advisor

Contributor

Project Center

Major

Unit (Department)

Editor

Tema

UN SDG

Tipo de recurso

License

Award

Explore, Discover, Share

Buscar

Resultados de la búsqueda

Limite su búsqueda