Thermal Performance Assessment Chamber
Público DepositedContenido Descargable
open in viewerRecent research has shown that fire attack hoses are burning through on the fireground, leaving firefighters without water and putting their lives at risk. To address this concern, the National Fire Protection Association (NFPA) has begun revising its standards to include more rigorous thermal performance tests for fire hoses. The Thermal Performance Assessment Chamber was designed and created to expose hoses to convective and radiative heat transfer at intensities similar to those found on the fireground. Initial testing has shown that when under thermal exposure, fire attack hoses fail in a matter of minutes. If adopted into the national standards, this apparatus will eventually be used to test all new hoses entering the fire service.
- This report represents the work of one or more WPI undergraduate students submitted to the faculty as evidence of completion of a degree requirement. WPI routinely publishes these reports on its website without editorial or peer review.
- Creator
- Publisher
- Identifier
- E-project-042516-134541
- Advisor
- Year
- 2016
- Date created
- 2016-04-25
- Resource type
- Major
- Source
- E-project-042516-134541
- Rights statement
- Última modificación
- 2024-05-13
Las relaciones
- En Collection:
Elementos
Elementos
Miniatura | Título | Visibilidad | Embargo Release Date | Acciones |
---|---|---|---|---|
MQP-ThermalPerformanceAssessmentChamber.pdf | Público | Descargar |
Permanent link to this page: https://digital.wpi.edu/show/q811kp85w